Tenda W6-S N300 300Mbps In-Wall Wireless Access Point
A clean wall, reliable room-level WiFi and no extra router taking up space.
The Tenda W6-S N300 In-Wall Wireless Access Point is a compact networking solution for hotels, apartments, dormitories and offices that need dedicated WiFi coverage in individual rooms. Instead of installing bulky desktop routers, the W6-S fits into a compatible 86mm wall junction box and connects directly to your wired network.
Featuring 300Mbps 2.4GHz wireless connectivity, two Fast Ethernet interfaces and IEEE 802.3af PoE support, this Tenda In-Wall Access Point is designed for simple, organized indoor networking.
Made for Hotel Rooms, Apartments and Divided Spaces
Large buildings often contain multiple smaller rooms separated by walls. A wireless router placed at one end of a corridor may not provide equally strong coverage inside every room.
With the Tenda W6S Wall Plate Access Point, network installers can place a separate wireless access point inside suitable rooms using existing or newly installed Ethernet cabling.
Its compact 86 × 86 × 34.8mm design helps the device blend into the wall instead of taking up desk space. This makes it a practical hotel room WiFi access point for guest rooms, university dormitories, small office cabins and serviced apartments.
The W6-S is intended for indoor room-level wireless connectivity, not long-distance outdoor coverage.
N300 Wireless Connectivity for Basic Internet Use
The Tenda W6-S supports IEEE 802.11b/g/n standards on the 2.4GHz frequency band, delivering a maximum theoretical wireless link rate of 300Mbps.
Two built-in 2dBi antennas support wireless connectivity for compatible smartphones, tablets and laptops. The access point also supports 20MHz and 40MHz channel bandwidth settings and adjustable transmission power.
For a small guest room or office cabin, this 300Mbps Wireless Access Point can provide connectivity for general browsing, messaging and everyday online activities.
Tenda recommends approximately five clients for practical deployment planning, although the device's maximum associated client specification is higher.
Important: The W6-S is a single-band WiFi 4 access point. It does not support 5GHz, WiFi 6 or Gigabit Ethernet. The advertised 300Mbps wireless rate is not a guaranteed internet speed.
A Wall Socket Design That Simplifies Cabling
The W6-S includes two 10/100Mbps Ethernet interfaces: one for PoE-powered network input and another for wired data output.
Its rear PoE input supports IEEE 802.3af, allowing a compatible PoE switch to supply both electrical power and network data through the Ethernet connection.
With maximum power consumption of only 3.4W, the device is designed for efficient operation in multi-room installations.
The additional Fast Ethernet port provides a convenient wired connection for suitable network devices when required.
Because both Ethernet ports are limited to 100Mbps, the W6-S is better suited to basic wireless networking rather than higher-speed Gigabit applications.
Separate Wireless Access for Different Users
For a hotel, guesthouse or small office, different groups of users may require separate network access.
The Tenda W6-S PoE Access Point supports multiple wireless SSIDs and VLAN tagging, allowing administrators to configure separate wireless networks when supported by the connected infrastructure.
Wireless client isolation, access control and adjustable radio settings offer additional control over connected devices.
Compatible Tenda M3 wireless controllers can also be used for centralized configuration and monitoring of multiple W6-S access points.
This is particularly useful in buildings where individually configuring every wall-mounted AP would take unnecessary time.
W6-S or W12: Which Tenda In-Wall AP Is Better?
The Tenda W6-S is designed for straightforward N300 WiFi coverage, with 2.4GHz wireless connectivity and Fast Ethernet ports.
The Tenda W12 AC1200 offers dual-band wireless connectivity and Gigabit Ethernet, making it more appropriate for buyers who need higher wireless capacity and faster wired connectivity.
For a smaller room with basic networking requirements, the W6-S can be sufficient. For a modern hotel, office or apartment project where 5GHz devices and Gigabit networking matter, the W12 may be the better long-term choice.
Always consider the building layout, expected user count, existing network cabling and available PoE equipment before selecting either model.
Tenda W6-S Access Point Price in Bangladesh
If you are searching for the Tenda W6S price in Bangladesh, Tenda W6-S price in BD or an affordable N300 In-Wall Access Point, this model is listed at Trende Bangladesh.
The product is currently Out of Stock. Please contact Trende to confirm the latest selling price, availability and warranty information before purchasing.
Visit the Tenda W6-S N300 In-Wall Wireless Access Point for current product details.
For a higher-speed alternative, explore the Tenda W12 AC1200 Dual-Band Gigabit In-Wall Access Point.
You can also compare the Tenda i9 Ceiling Mount Access Point, browse the Tenda Access Point Collection or explore more models in the Access Point & Range Extender Category.
