Tenda i6 Wireless N300 300Mbps Ceiling Mount Access Point
One Wireless Device, Different Ways to Expand Your Network
Not every wireless installation follows the same setup. Some offices can run Ethernet cables to their access points, while others need to extend an existing wireless connection. The Tenda i6 Wireless N300 Access Point offers flexible operating modes for these different networking requirements.
Designed for indoor commercial WiFi, the Tenda i6 combines 300Mbps wireless connectivity, two internal antennas, PoE support and a compact ceiling-mount design. It is a practical option for small offices, restaurants, reception areas and other locations requiring an additional wireless access point.
Three Operating Modes for Different Network Setups
One of the useful features of the Tenda i6 N300 Access Point is its support for AP, Client+AP and Repeater modes.
AP Mode connects the device to an existing wired network and creates a wireless connection for nearby devices. This is useful when Ethernet cabling is available in an office or commercial building.
Client+AP Mode provides additional wireless deployment flexibility by connecting to a compatible upstream WiFi network while offering wireless access to local devices.
Repeater Mode extends the coverage of an existing compatible wireless network without requiring a wired uplink to the main router.
These options make the Tenda i6 Wireless AP more flexible than an access point designed only for wired deployment. However, the available speed and connection quality depend on the selected mode, upstream signal and surrounding interference.
N300 Performance with High-Power Wireless Design
The Tenda i6 operates on the 2.4GHz frequency band using IEEE 802.11b/g/n wireless standards.
It supports a maximum theoretical wireless link rate of 300Mbps through 2×2 MIMO technology and two internal 2dBi omnidirectional antennas.
The access point also uses a high-power wireless design with an independent power amplifier to improve signal transmission in suitable environments. Its adjustable transmission power helps installers configure wireless coverage according to the deployment.
This 2.4GHz N300 Access Point can support general internet browsing, business messaging, cloud-based applications and other everyday connectivity requirements.
However, it does not provide 5GHz, dual-band WiFi, WiFi 6 or Gigabit Ethernet. Its wired interface is limited to 100Mbps, which can become a bottleneck on faster networks.
Network Control for Small Commercial Installations
A shop, training center or office may need separate wireless access for employees and visitors.
The Tenda i6 Ceiling Mount Access Point supports wireless client isolation, access control, hidden SSIDs and SSID-to-VLAN tagging for compatible network configurations.
Quality of Service (QoS), WMM and wireless multicast-related functions provide additional tools for managing traffic within supported environments.
For projects using multiple Tenda access points, compatible AP controller management can help administrators configure and monitor devices more efficiently.
Tenda lists a maximum concurrent client capacity of 20 for this model. This should be treated as a planning limit, not a guarantee that 20 users can simultaneously run demanding applications at maximum speed.
Ceiling Mounting, Fast Ethernet and PoE Installation
The Tenda i6 has a circular housing measuring 144.2 × 144.2 × 40.12mm, suitable for ceiling or appropriate wall installation.
Its design helps keep networking hardware away from desks and counters while allowing installers to position wireless coverage in a suitable location.
The device includes one 10/100Mbps Fast Ethernet port and supports IEEE 802.3af PoE power input. It also supports a 9V/0.6A DC power arrangement, with maximum power consumption of 6W.
Using a compatible PoE switch allows network data and electrical power to travel through Ethernet, reducing the need for a separate electrical outlet near the ceiling.
Before installation, check the power source, cabling and supplied accessories. Do not assume that every package includes a DC adapter or PoE injector.
Choosing Tenda i6 for Your Network
The Tenda i6 300Mbps Wireless Access Point is most suitable for smaller indoor network deployments where basic 2.4GHz WiFi, flexible operating modes and straightforward management are the main requirements.
For an office with moderate device usage, it can be used to create wireless connectivity from an existing wired network. Its Repeater and Client+AP modes also provide installation alternatives when appropriate.
If your project requires higher wireless capacity, 5GHz connectivity or Gigabit Ethernet, consider a newer dual-band access point.
For larger commercial deployments, network administrators should also verify firmware support, device availability and long-term maintenance requirements before selecting the i6.
Tenda i6 Access Point Price in Bangladesh
Searching for the Tenda i6 price in Bangladesh, Tenda N300 Access Point price in BD or a 300Mbps Ceiling Mount WiFi Access Point?
The Tenda i6 Wireless N300 Access Point is listed at Trende Bangladesh but is currently Out of Stock. Please confirm the latest selling price, availability and warranty information before purchasing.
Visit the Tenda i6 Wireless N300 Access Point for current product information.
If you are comparing alternative installation options, explore the Tenda i9 Ceiling Mount Access Point, the Tenda W6-S In-Wall Access Point or the Tenda W12 AC1200 Gigabit In-Wall Access Point.
You can also browse the Tenda Access Point Collection, Access Point & Range Extender Category, Network Switches, Networking Cables and other Networking Products at Trende Bangladesh.
