HSGQ SG2016P 16 Port Gigabit PoE Switch Price in Bangladesh

A 16-camera CCTV project needs more than 16 Ethernet connections. You also need ports for your recorder, network router, or fiber uplink. The HSGQ SG2016P 16 Port Gigabit PoE Switch is designed with this in mind, offering 16 powered Gigabit Ethernet ports alongside dedicated copper and fiber uplink connections.

This HSGQ PoE switch is suitable for surveillance installations in offices, schools, factories, residential buildings, hotels, and commercial properties. With IEEE 802.3af/at PoE support, a 180W total PoE budget, and Gigabit data connectivity, it provides a practical way to connect multiple compatible IP cameras from one central location.

More Room for Cameras, Recorders and Network Connections

The HSGQ-SG2016P features 16 × 10/100/1000Mbps PoE RJ45 ports, allowing compatible IP cameras, wireless access points, and other PoE devices to receive both network data and power through Ethernet cabling.

What makes the port layout useful is the addition of 2 Gigabit RJ45 uplinks and 2 Gigabit SFP ports.

You can use the separate RJ45 uplinks for compatible network equipment while keeping the 16 PoE ports available for powered devices. The SFP interfaces provide additional flexibility when connecting suitable fiber networking equipment.

For installers searching for a 16 Port PoE Switch with 2 SFP or a Gigabit PoE Switch with Fiber Uplink, this configuration makes planning a CCTV network more convenient.

A Closer Look at the 180W PoE Capacity

The HSGQ SG2016P PoE Switch supports IEEE 802.3af and IEEE 802.3at standards, with up to 30W available on a compatible PoE+ port.

However, the maximum power of one port and the total power available for all ports are different. This switch has a manufacturer-listed 180W total PoE output, shared between connected powered devices.

For example, if your installation uses 12 cameras rated at 10W each, their combined rated requirement would be 120W. You should still allow suitable power headroom and check each camera's maximum consumption, particularly if it has infrared illumination or other power-demanding features.

This makes the HSGQ SG2016P a useful 180W PoE Switch for properly planned CCTV installations.

For a smaller camera project, you can also check the HSGQ SF1006P 6 Port PoE Switch.

Standard Networking or Extended Camera Connections

The HSGQ SG2016P includes a physical DIP switch with Default and Extend operating modes.

In Default Mode, the switch provides standard Ethernet operation for compatible connected equipment.

In Extend Mode, PoE ports 9–16 operate at 10Mbps to support suitable longer-distance camera connections. This option can be helpful for selected CCTV installations, but the reduced port speed must be considered when choosing camera resolution, bitrate, and cabling.

The switch also supports PoE port prioritisation to help manage powered devices when power availability becomes limited.

These features give installers more flexibility when choosing a PoE Switch with Extend Mode for surveillance projects.

Gigabit Performance without Complex Setup

With 40Gbps switching capacity, 29.76Mpps packet forwarding, an 8K MAC address table, and a 3Mbit packet buffer, the SG2016P is designed to handle data transmission between its Gigabit interfaces.

Its store-and-forward operation helps process Ethernet traffic, while automatic port negotiation and supported Ethernet flow control simplify everyday connectivity.

The switch does not require advanced Layer 3 routing configuration for normal operation. Its physical mode selector provides basic installation flexibility rather than the full VLAN, routing, and cloud-management functions of a professional managed switch.

For projects where advanced management is essential, compare the HSGQ 24 Port Layer 3 Managed PoE Switch.

Designed for Real CCTV Installation Work

The SG2016P has a metal chassis measuring 320 × 207 × 44mm and supports rack, wall, or desktop placement.

It uses AC 100–240V input and has a listed 52V/3.84A internal power supply specification. LED indicators help installers check connection and operation status during setup.

The 16 Port Gigabit PoE Switch can be useful for IP surveillance in shops, apartment buildings, warehouses, office floors, and educational institutions.If your project requires a different uplink arrangement,

Trende also-lists the HSGQ SF1016P 18 Port PoE Switch with Gigabit Uplinks. For more camera connections, see the HSGQ SG2024P 24 Port PoE Switch.

HSGQ SG2016P Price and Availability in Bangladesh

The HSGQ SG2016P price in Bangladesh has not yet been announced at Trende Bangladesh. The product is currently listed as Upcoming, with pre-booking available.

When comparing 16 Port PoE Switch Price in BD or HSGQ PoE Switch Price in BD, consider the SG2016P's 16 Gigabit PoE ports, dedicated RJ45 and SFP uplinks, 180W shared power budget, and easy DIP switch operation.

For buyers checking HSGQ SG2016P specifications or choosing a 16 Port PoE Switch for IP Camera installations, this model is most suitable when its port speeds, power capacity, and operating modes match the planned network.

It is also worth considering as a straightforward 16 Port Unmanaged PoE Switch for Office and CCTV networking where advanced managed-switch features are not required.

Check the latest price, available stock, warranty details, and connected device power requirements before confirming your order.

Explore Trende's Network Switch Collection and Networking Products for more networking solutions.