Tenda TEG1128P-24-250W 24-Port Gigabit PoE Switch with 2 SFP Uplinks

Setting up a large IP surveillance network becomes easier when multiple cameras can receive data and power through the same Ethernet connection. The Tenda TEG1128P-24-250W 24-Port Gigabit PoE Switch is built for CCTV installations and business networks that need reliable PoE connectivity without complex switch configuration.

Featuring 24 Gigabit PoE+ ports, 2 dedicated Gigabit RJ45 uplinks and 2 Gigabit SFP slots, the switch provides flexible connectivity for IP cameras, wireless access points and compatible PoE devices. Its 230W shared PoE budget, 56Gbps switching capacity and four hardware operating modes make it a practical solution for medium-sized surveillance projects.

Power 24 PoE Devices with Dedicated Network Uplinks

The TEG1128P-24-250W provides 24 Gigabit RJ45 ports supporting IEEE 802.3af/at Power over Ethernet.

Each PoE port can supply up to 30W to a compatible powered device, while the switch provides a combined 230W PoE power budget.

Two additional Gigabit RJ45 ports and two 1000Mbps SFP slots allow network uplink connections without occupying the powered ports.

This configuration is useful when connecting IP cameras to an NVR, router or upstream network switch. The SFP slots can also connect compatible fiber transceivers for optical network links.

Understanding the 230W PoE Power Budget

Although the model number includes 250W, the usable PoE output budget is 230W, while the switch's specified total power consumption is 250W.

For example, 20 IP cameras requiring 8W each would consume approximately 160W, leaving additional capacity within the shared budget.

However, connecting 24 devices requiring 15W each would exceed the available PoE power. Installers should calculate the maximum power requirements of each connected device, particularly when cameras use infrared lighting or other power-consuming functions.

The switch supports up to 30W per individual PoE port, but this does not mean all 24 ports can deliver 30W simultaneously.

Four Hardware Modes for Different Network Requirements

One of the most useful features of the Tenda TEG1128P-24-250W is its hardware mode selector.

Standard Mode allows normal communication between ports, making it suitable for general Ethernet and PoE networking.

Priority Mode gives ports 1–8 higher priority, helping protect important network connections when traffic becomes congested.

Extend Mode supports transmission distances of up to 250 meters on ports 17–24 under suitable cabling and connection conditions.

VLAN Mode isolates PoE ports 1–24 from one another while allowing communication with the dedicated uplink ports. This can help reduce interference between connected devices and limit common broadcast-related problems.

Unlike a Cloud Managed Switch, the TEG1128P-24-250W uses hardware-based mode selection rather than CloudFi remote management.

Gigabit Switching for Surveillance Traffic

The switch offers 56Gbps switching capacity and a 41.7Mpps packet forwarding rate to support efficient data transfer between connected Gigabit devices.

Its 8K MAC address table, 4Mb packet buffer and store-and-forward technology help maintain reliable communication across the network.

The TEG1128P-24-250W also features 6kV lightning protection for Ethernet interfaces and power input, providing additional electrical surge resistance under the manufacturer's specified conditions.

With rack, desktop and wall installation support, it is suitable for CCTV cabinets, offices, retail locations and commercial network equipment rooms.

For smaller surveillance installations that require fewer powered connections, the Tenda TEG1118P-16-250W 16-Port Gigabit PoE Switch is another option available at Trende Bangladesh.

Tenda TEG1128P-24-250W Price in Bangladesh

The Tenda TEG1128P-24-250W 24-Port Gigabit PoE Switch price in Bangladesh is ৳13,500 at Trende Bangladesh.

With 24 Gigabit PoE+ connections, a 230W shared power budget, two Gigabit RJ45 uplinks, two SFP slots and four selectable operating modes, this switch offers an efficient way to expand professional surveillance and business networks.

Choose the Tenda TEG1128P-24-250W for CCTV cameras, wireless access points and compatible PoE devices. Contact Trende Bangladesh to confirm current stock availability, applicable warranty and delivery information before placing an order.