Tenda TEG1118P-16-250W 16 Port Gigabit PoE Switch Price in Bangladesh
Power multiple network devices and expand your wired infrastructure with the Tenda TEG1118P-16-250W 16GE+2SFP Unmanaged PoE Switch. Designed for professional IP surveillance, office networks, hotels, educational institutions, and business installations, this switch combines 16 Gigabit PoE ports with two dedicated Gigabit SFP fiber uplinks.
With 230W total PoE output, 36Gbps switching capacity, and four selectable operating modes, the TEG1118P provides flexible networking without requiring complicated software management. Its durable metal enclosure, rackmount design, and IEEE 802.3af/at compatibility make it a practical solution for businesses installing multiple powered networking devices.
16 Gigabit PoE Ports for High-Speed Network Connectivity
The Tenda TEG1118P 16 Port Gigabit PoE Switch is equipped with 16 auto-negotiation 10/100/1000Mbps RJ45 ports that deliver both Ethernet data and PoE power.
These ports support compatible IP cameras, wireless access points, VoIP phones, and other powered networking equipment through a single Ethernet cable, reducing the need for separate power adapters at each device.
Unlike 10/100Mbps Fast Ethernet switches, the TEG1118P provides Gigabit connectivity on its 16 RJ45 ports during normal operation, making it useful for demanding wired networks and professional surveillance installations.
Businesses looking for a reliable Tenda Network Switch can consider this model for installations requiring multiple Gigabit PoE connections.
230W PoE Power Budget with Up to 30W Per Port
Despite the 250W designation in its model number, the Tenda TEG1118P-16-250W offers a 230W total PoE output budget.
All 16 PoE ports support IEEE 802.3af and IEEE 802.3at standards, with up to 30W output per port, subject to the total available power budget.
For example, 16 compatible IP cameras drawing 12W each would require approximately 192W of PoE output, remaining within the rated 230W budget.
This makes the switch suitable for multi-camera surveillance systems, office access point deployments, and professional installations where multiple devices need centrally supplied PoE power.
Before installation, check each device's PoE requirements and ensure the combined demand stays within the available output capacity.
Two Dedicated Gigabit SFP Ports for Fiber Optic Networking
The TEG1118P includes 2 × 1000Mbps Base-X SFP slots for connecting compatible fiber optic transceivers.
These independent fiber interfaces enable suitable uplink connections between networking equipment in different sections of a building, office, or campus.
Fiber transmission distance depends on the selected SFP module, fiber cable, and network configuration.
With 16 Gigabit PoE RJ45 ports and two separate SFP uplinks, the switch provides 18 network interfaces for installations requiring both copper Ethernet and optical fiber connectivity.
For a non-PoE alternative with fiber connectivity, explore the Tenda TEG1024F 24 Port Gigabit Switch with 2 SFP Ports.
36Gbps Switching Capacity for Efficient Data Transmission
The Tenda TEG1118P Gigabit PoE Switch features 36Gbps switching capacity and a packet forwarding rate of 26.8Mpps.
Its 8K MAC address table and store-and-forward switching mechanism help manage Ethernet traffic efficiently between connected devices.
These capabilities are beneficial for offices, IP surveillance systems, and network installations that require simultaneous connectivity across multiple wired devices.
The Gigabit SFP uplinks also allow suitable fiber-based connections to upstream switches and other network equipment.
Four Operating Modes for Different Network Requirements
One of the distinctive features of the Tenda TEG1118P-16-250W is its four selectable hardware operating modes.
Standard Mode: All ports operate in normal unmanaged switching mode, allowing standard Ethernet communication.
Priority Mode: Ports 1–8 receive higher traffic priority, providing a useful option for selected important network devices when congestion occurs.
Extend Mode: Ports 9–14 can support Ethernet transmission distances of up to 250 meters under suitable cabling and installation conditions. In this mode, these ports operate at a reduced 10Mbps data rate.
VLAN Mode: Provides predefined port isolation to help separate access-port traffic while maintaining connectivity through designated uplink interfaces. This can help reduce unwanted communication between isolated devices.
These modes offer practical installation flexibility without requiring advanced managed-switch configuration.
6KV Lightning Protection for Networking Reliability
The TEG1118P includes 6KV-rated surge protection for its uplink interfaces and power circuitry, helping reduce the risk of damage from electrical surges within the specified protection limits.
The switch also includes electrostatic discharge protection to improve resilience against certain electrical disturbances.
These protection features are valuable for business and surveillance installations where stable network operation is important.
Appropriate grounding and additional surge protection are still recommended according to the installation environment.
Durable Metal Body with Rackmount Installation
The Tenda TEG1118P comes with a durable metal enclosure designed for organised business networking installations.
Its dimensions of 440 × 178.8 × 44mm make it suitable for compatible standard 19-inch rackmount installations.
The rackmount design helps network administrators arrange the switch alongside other equipment in networking cabinets and equipment rooms.
Its front-panel LED indicators provide useful status information for Ethernet links, SFP connections, power, and PoE capacity.
Browse the Network Switch Collection at Trende Bangladesh for additional PoE and Gigabit networking options.
Plug-and-Play Installation for Office and CCTV Networks
As a Layer 2 unmanaged switch, the Tenda TEG1118P is designed for straightforward installation without complicated software configuration.
Connect the switch to its AC power supply, attach compatible PoE-powered devices to the RJ45 ports, and connect the appropriate uplink interfaces to the existing network.
Its PoE detection functionality automatically identifies compatible IEEE 802.3af/at powered devices.
Network installers can then choose an appropriate operating mode for standard Ethernet networking, priority traffic, extended transmission, or basic port isolation.
For smaller PoE installations, the Tenda TEG1109P 8 Port Gigabit PoE Switch provides an alternative port configuration.
Ideal for IP Surveillance, Offices and Business Networking
The Tenda TEG1118P-16-250W is suitable for a variety of professional networking applications, including:
Multi-camera IP CCTV surveillance systems
Offices with multiple PoE wireless access points
Hotels, schools, and commercial buildings
Business networks requiring Gigabit Ethernet connectivity
Network cabinets with fiber optic uplinks
VoIP phone installations using compatible PoE devices
Surveillance projects requiring extended Ethernet connections
For organisations requiring advanced VLAN configuration, Layer 3 routing, and intelligent PoE administration, the Tenda TEG5310P-8-150W L3 Managed PoE Switch offers a different management-focused solution.
Larger installations can also explore the Tenda TEG5328P-24-410W 24 Port L3 Managed PoE Switch.
Tenda TEG1118P-16-250W 16 Port PoE Switch Price in Bangladesh
The Tenda TEG1118P-16-250W 16 Port Gigabit PoE Switch price in Bangladesh is ৳14,500 at Trende Bangladesh, compared with its listed regular price of ৳17,000.
Combining 16 Gigabit PoE RJ45 ports, two dedicated Gigabit SFP uplinks, a 230W PoE output budget, 36Gbps switching capacity, and four selectable operating modes, this switch is a practical solution for professional wired networking and surveillance systems.
Buy the Tenda TEG1118P-16-250W 16GE+2SFP Unmanaged PoE Switch from Trende Bangladesh with a listed 1-year warranty. Check the latest price and stock availability before ordering for your office, CCTV, or business networking project.
