Tenda S110PC 10 Port PoE Switch Price in Bangladesh

Planning an IP CCTV surveillance network for your shop, office, warehouse, or small business? The Tenda S110PC 10-Port 100M Unmanaged PoE Switch offers an easy and practical solution for connecting multiple security cameras without complicated network configuration.

Featuring 8 PoE-enabled Fast Ethernet ports, 2 dedicated data uplink ports, and an 80W rated PoE budget, the S110PC simplifies network installation by delivering data and electrical power through compatible Ethernet cables. With up to 250m extended transmission, QoS priority, and a compact desktop design, this Tenda PoE switch is particularly useful for small-scale surveillance projects.

8 PoE Ports with 2 Dedicated Uplink Connections

The Tenda S110PC features a total of 10 × 10/100Mbps RJ45 Ethernet ports, including eight PoE-enabled ports and two additional non-PoE data ports.

Ports 1–8 support both Ethernet data transmission and PoE power delivery to compatible IP cameras, wireless access points, and other powered network devices.

The two remaining ports can connect an NVR and router simultaneously, allowing convenient network recording and access to online monitoring services when the connected equipment is properly configured.

This dual-uplink arrangement is especially useful for installations requiring multiple cameras without using a PoE port for the network connection.

For other surveillance networking configurations, explore the Tenda Network Switch Collection at Trende Bangladesh.

80W Rated PoE Budget with IEEE 802.3af/at Support

The Tenda S110PC 8 Port PoE Switch supports IEEE 802.3af and IEEE 802.3at standards, allowing compatible powered devices to receive electricity and network data through the same Ethernet cable.

Each PoE port supports up to 30W, while the switch has an 80W rated total PoE budget. Tenda also publishes a 75W maximum output figure in its official product overview, so checking the device revision and power requirement is important before installation.

For example, eight compatible cameras requiring 8W each would have a combined nominal consumption of 64W, remaining within both published limits.

However, the S110PC cannot deliver 30W to all eight PoE ports simultaneously. Network installers should calculate each device's maximum power requirement and account for the overall PoE capacity.

Up to 250m Extended Ethernet Transmission for CCTV

One of the most useful features of the S110PC is its 250-meter extended transmission capability, designed for compatible surveillance installations.

This feature allows suitable IP cameras to connect across longer cable runs than standard 100-meter Ethernet installations, subject to the supported operating mode and appropriate cabling conditions.

In extended transmission mode, supported ports operate at reduced bandwidth. Therefore, the video bitrate and network requirements of connected cameras should be checked before installation.

Actual achievable distance depends on cable quality, environmental conditions, and the connected devices.

This function can be useful for security cameras installed across shops, warehouses, parking areas, and larger commercial premises.

QoS Priority for Important CCTV Traffic

The Tenda S110PC supports a QoS priority function for ports 1–2, helping selected network traffic receive priority during congestion.

For surveillance applications, this can be useful when important security cameras need preferential handling alongside other network devices.

QoS prioritisation does not increase the physical Ethernet port speed, but it can help manage traffic according to the switch's supported priority behaviour.

Together with its PoE functionality and dual-uplink configuration, this feature makes the S110PC suitable for compact CCTV networking installations.

2Gbps Switching Capacity for Efficient Data Communication

The Tenda S110PC Unmanaged PoE Switch offers 2Gbps switching capacity and a forwarding rate of 1.49 million packets per second.

It also includes a 1K MAC address table and store-and-forward switching technology to support network communication between connected devices.

All ten Ethernet ports support 10/100Mbps connectivity, making the S110PC suitable for compatible Fast Ethernet surveillance and business networking equipment.

This model is not a Gigabit Ethernet switch. If your networking project requires Gigabit connections and a higher PoE power budget, the Tenda TEG1109P 8 Port Gigabit PoE Switch is another option worth considering.

4KV Lightning Protection for Networking Reliability

The Tenda S110PC features 4KV-rated lightning surge protection, helping reduce the risk of equipment damage caused by certain electrical disturbances within its specified protection limits.

Its PoE protection mechanisms also help safeguard compatible powered devices against supported overload and short-circuit conditions.

These features are useful for networking environments where IP surveillance equipment operates for extended periods.

Proper grounding, suitable network cabling, and additional surge protection remain important, particularly for outdoor camera installations.

Compact Design with Desktop and Wall-Mounting Support

The S110PC features a compact enclosure measuring 175 × 127 × 43mm, making it convenient for space-limited installations.

It supports desktop and wall mounting, allowing the switch to be installed in offices, shops, security monitoring rooms, or suitable indoor networking spaces.

Its LED indicators provide visual information about power status and Ethernet link activity.

The switch supports 190–240V AC, 50/60Hz input and is designed for straightforward operation without complicated software-based configuration.

Plug-and-Play Installation for Small CCTV Networks

As an unmanaged Layer 2 PoE switch, the Tenda S110PC requires minimal setup.

Connect the switch to a suitable power source, attach compatible PoE cameras to the powered ports, and connect your NVR or router through the two additional Ethernet interfaces as required.

The switch automatically identifies compatible PoE devices and supplies power within its supported capacity.

This makes it a practical choice for CCTV technicians, small businesses, retail stores, and users looking for easy surveillance network installation.

For smaller setups requiring only four PoE ports, the Tenda S106PC 6 Port PoE Switch offers a more compact alternative.

Suitable for CCTV, Retail Shops, Offices and Small Businesses

The Tenda S110PC is designed for networking applications that require multiple powered Ethernet connections, including:

• IP CCTV surveillance networks with compatible PoE cameras

• Retail shops, supermarkets, and convenience stores

• Small offices and business security installations

• Restaurants, hotels, and commercial monitoring areas

• Warehouse and storage-area surveillance

• Network installations requiring separate NVR and router uplinks

• Compatible PoE-powered access points and VoIP devices

For installations needing a different PoE port configuration, you can also consider the Tenda TEF1105P 5 Port PoE Switch.

Browse the Network Switch Price in Bangladesh category at Trende Bangladesh to compare other networking solutions.

Tenda S110PC 10 Port PoE Switch Price in Bangladesh

The Tenda S110PC 10 Port PoE Switch price in Bangladesh is ৳3,000 at Trende Bangladesh, compared with its listed regular price of ৳3,450.

Combining eight 10/100Mbps PoE ports, two dedicated data uplinks, an 80W rated PoE budget, 250m extended transmission capability, and 4KV surge protection, the S110PC provides a convenient solution for small-scale IP surveillance and business networking.

Buy the Tenda S110PC 10-Port 100M Unmanaged PoE Switch from Trende Bangladesh with a listed 1-year warranty. Check the latest price, stock availability, and delivery options before placing your order.