Solitine Optical Power Meter with VFL & R45 Tester – 3-in-1 Fiber Network Testing

When an internet connection becomes unstable, identifying the problem isn't always straightforward. The issue could be low optical signal power, a damaged fiber cable or incorrect Ethernet wiring. The Solitine Optical Power Meter with VFL & R45 Tester helps technicians investigate these problems using three essential testing functions in a single handheld device.

Designed for ISP professionals, FTTH installers and network technicians, this optical fiber power meter combines optical signal measurement, a 650nm Visual Fault Locator (VFL) and RJ45 network cable testing. Its compact construction makes it practical for installations, maintenance work and field troubleshooting.

Measure Optical Signal Power with Greater Precision

Understanding the received optical power level is essential when diagnosing fiber network performance. The Solitine tester uses an InGaAs detector and supports six calibrated wavelengths: 850nm, 1300nm, 1310nm, 1490nm, 1550nm and 1625nm.

According to the manufacturer's published specifications, the optical power meter provides a measurement range of -70 to +10 dBm, 0.01 dB resolution and ±0.2 dB accuracy for most supported wavelengths, with ±0.5 dB specified at 850nm.

It supports absolute power measurements in dBm and relative measurements in dB, along with mW readings. These functions help technicians check optical signal levels and compare readings during routine fiber installation and network maintenance.

Trace Fiber Faults with the Built-in 650nm VFL

A weak or interrupted fiber connection sometimes results from a sharp bend, broken fiber or faulty connection. The integrated Visual Fault Locator produces visible red laser light at 650nm to help identify certain faults along compatible fiber links.

The manufacturer specifies VFL testing capability of up to 10km. Actual fault visibility varies with cable construction, accessibility and installation conditions.

Having an optical power meter with VFL in one device is particularly useful for technicians who regularly check fiber connections at customer premises, optical distribution boxes and network installation sites.

The VFL helps locate visible faults, while the power meter measures optical signal strength. These are separate testing functions, and neither replaces a full OTDR analysis.

RJ45 Testing for Copper Network Connections

Fiber networks often connect to Ethernet equipment through ONUs, switches and other networking devices. That means technicians may need to inspect copper network cables alongside the optical connection.

The integrated RJ45 tester checks network cable continuity, shorts and wiring sequence. It can help identify incorrect pin arrangements and common cable termination faults during LAN installation.

This makes the Solitine device useful for professionals handling both optical fiber and Ethernet cabling. The RJ45 testing function is intended for basic physical cable diagnostics rather than Ethernet bandwidth certification.

Practical Features for Field Technicians

The Solitine tester includes a large backlit LCD for viewing readings in different lighting conditions. Its supported functions include data storage, wavelength selection, relative measurements, automatic power-off and a battery status indicator.

The manufacturer also specifies rechargeable lithium or AAA battery support, depending on the supplied configuration. Published dimensions are approximately 185 × 75 × 35mm, with a listed weight of around 280g including the battery.

Its portable design makes it easier to carry between network cabinets, customer installations and fiber maintenance locations. For technicians comparing a mini optical power meter or portable fiber optic cable tester, the integrated VFL and RJ45 functions are useful considerations.

A Useful Tool for ISP, FTTH and Network Maintenance

This Solitine tester is particularly suitable for professionals who perform several types of network testing during a normal working day.

An ISP technician can check optical signal power before investigating a customer's connection issue. An FTTH installer can use the VFL to identify certain visible fiber faults, while a LAN technician can inspect cable wiring after terminating an Ethernet connector.

For related installation equipment, Trende also offers collections of Networking Accessories, Networking Cables, Fiber Cleavers, Fusion Splicers, Patch Panels and LAN Cards.

Solitine Optical Power Meter Price in Bangladesh

The Solitine Optical Power Meter with VFL & R45 Tester price in Bangladesh is listed at ৳5,500 at Trende Bangladesh. The product is currently marked out of stock, so availability and the latest selling price should be confirmed before ordering.

For buyers comparing the optical fiber power meter price in Bangladesh, this Solitine device offers three testing functions in one unit, reducing the need to carry separate basic tools for optical power measurement, visible fiber fault location and RJ45 wiring checks.

Check the Solitine Optical Power Meter product page at Trende Bangladesh for the latest availability and ordering information.