Phyhome P3 1GE XPON ONU – Gigabit Fiber Connectivity

The Phyhome P3 Single Port Gigabit XPON/GPON ONU is designed for FTTH broadband connections where a reliable fiber-to-Ethernet connection is required. Equipped with one 10/100/1000Mbps RJ45 LAN port, this compact Phyhome P3 1GE XPON ONU is suitable for connecting a separate Wi-Fi router, computer or network switch to an ISP's optical fiber network.

For home users, small offices and ISP technicians, the Phyhome P3 provides GPON/EPON connectivity, flexible network configuration and web-based management in a compact device.

Gigabit LAN Port with GPON & EPON Support

The Phyhome P3 supports both GPON and EPON technology, complying with ITU-T G.984.x and IEEE 802.3ah standards.

Its optical interface supports up to 2.5Gbps downstream and 1.25Gbps upstream in GPON mode, while EPON mode supports 1.25Gbps in both directions. These are PON-side transmission rates, not guaranteed internet speeds.

The single Gigabit Ethernet port provides a connection rate of up to 1000Mbps to compatible networking equipment. This makes the Phyhome P3 ONU useful for broadband setups that require a Gigabit LAN connection instead of a 100Mbps port.

Flexible Configuration for ISP Networks

The Phyhome P3 XPON ONU supports Bridge Mode, Routing Mode and mixed working modes, allowing technicians to configure the device according to network requirements.

Supported connection options include PPPoE, Static IP and Dynamic IP, along with DHCP, VLAN and IPv4/IPv6 functions. Web management and TR-069 support help technicians configure and monitor compatible deployments.

The manufacturer also specifies OMCI/OAM management and compatibility with mainstream OLT platforms. However, successful registration depends on the ISP's authentication settings, firmware and OLT configuration.

Compact Design for FTTH Installation

With dimensions of approximately 104 × 70 × 22mm, the Phyhome P3 fits conveniently into indoor fiber internet setups.

It operates using a 12V DC 0.5A adapter with rated power consumption up to 6W. The manufacturer lists both SC/UPC and SC/APC connector options, so the supplied variant should match the ISP's fiber connection.

The P3 does not have built-in Wi-Fi. A separate wireless router is required if you want to connect smartphones, laptops and other devices wirelessly.

For related networking equipment, check Trende's ONU Collection, Networking Cables and Network Switches.

Phyhome P3 Price in Bangladesh

The Phyhome P3 price in Bangladesh is ৳1,110 at Trende, with a listed regular price of ৳1,375.

If you're comparing the Phyhome ONU price in BD or looking for a 1GE XPON ONU price in Bangladesh, the P3 offers Gigabit LAN connectivity, GPON/EPON access and flexible ISP configuration for compatible fiber networks.

Buy the Phyhome P3 Single Port Gigabit XPON/GPON ONU from Trende Bangladesh. Confirm the optical connector type and ISP compatibility before ordering.