IP-COM Pro-6-LRV2.0 AX3000 WiFi 6 Long Range Access Point
More devices. Wider indoor coverage. A network designed to keep up.
When dozens of wireless devices share the same office, hotel or commercial WiFi network, dependable connectivity becomes more important than simply choosing a router with a higher advertised speed. The IP-COM Pro-6-LRV2.0 802.11AX Dual-Band Long Range Access Point is developed for these demanding indoor environments, bringing AX3000 WiFi 6 performance, Gigabit Ethernet and ProFi Cloud Management into a ceiling-mounted wireless solution.
With a listed price of ৳12,200 in Bangladesh, the Pro-6-LRV2.0 is designed for organizations planning reliable wireless coverage across business spaces.
AX3000 Performance That Goes Beyond Basic Dual-Band WiFi
The Pro-6-LRV2.0 supports theoretical wireless link rates of up to 574Mbps on 2.4GHz and 2402Mbps on 5GHz, giving it an AX3000-class combined wireless capacity of approximately 3000Mbps.
Its 802.11ax WiFi 6 technology brings several practical improvements:
160MHz Channel Width: Supports higher wireless link speeds with compatible 5GHz devices and suitable channel conditions.
OFDMA: Helps organize wireless transmission more efficiently when multiple compatible devices share the network.
2×2 MU-MIMO: Improves simultaneous communication efficiency with supported clients.
Beamforming: Helps direct wireless energy towards connected devices.
Target Wake Time (TWT): Supports more efficient power scheduling for compatible WiFi 6 clients.
For businesses comparing a dual-band long range access point with older WiFi 5 equipment, these features make the IP COM Pro 6 LR series a worthwhile option to evaluate.
One Access Point, Many Connected Devices
A hotel lobby during check-in, a conference room during a meeting or a busy training centre can create heavy demand on a wireless network.
The IP-COM Pro-6-LRV2.0 supports up to 256 clients according to the manufacturer, with 80 recommended clients under suitable operating conditions. This distinction matters: the maximum supported number is not a promise that every connected device will receive the same performance.
For network planners, the recommended figure provides a more useful starting point when estimating access-point requirements. Actual performance depends on applications, internet bandwidth, interference, device capabilities and wireless network design.
Its long-range ceiling-mount design, internal antennas and adjustable transmission power make the device suitable for offices, educational campuses, conference facilities, hotels and commercial indoor spaces.
Control Your WiFi, Even Across Multiple Locations
For a growing business, managing every access point separately can become inconvenient.
IP-COM ProFi Cloud Management helps administrators manage compatible network devices centrally. Alongside local AP administration, the Pro-6-LRV2.0 offers functionality useful for organized business networks.
Create separate wireless networks for employees and guests through multiple SSIDs. Use VLAN tagging with compatible switches and gateways to segment traffic. Adjust transmission power, configure client isolation and control connected devices according to network requirements.
Support for 802.11k/v/r roaming-related technologies also helps compatible clients move between properly configured access points. Roaming results depend on client support and the overall network configuration.
For administrators searching for IP-COM Pro-6-LR configuration information, the official Pro-6-LRV2.0 user guide and firmware documentation should be used to confirm settings specific to this hardware revision.
Installation Details You Should Know Before Ordering
This is a ceiling-mount WiFi 6 access point, not a standalone internet modem or conventional dual-band router.
The Pro-6-LRV2.0 measures approximately 250.6mm in diameter and 55mm in height and provides two Gigabit Ethernet interfaces, including a PoE-capable port. It requires a compatible IEEE 802.3at PoE power source, with manufacturer-specified maximum power consumption of 14.8W.
Although the wireless system is rated AX3000, the Ethernet interfaces operate at up to 1Gbps each. Therefore, the 3000Mbps figure should not be interpreted as guaranteed internet throughput through a single Gigabit uplink.
A proper installation should include suitable network cabling, PoE power and a gateway or router for internet access.
For installation equipment, explore Trende's Network Switch Collection and Networking Cables. Confirm whether a PoE injector or power accessory is included with the supplied package.
Upgrade Your Wireless Network with the Right IP-COM Model
Choosing the Pro-6-LRV2.0 makes sense when WiFi 6, higher client capacity and managed long-range indoor coverage are important.
For a more compact AX3000 solution, compare the IP-COM Pro-6-LITE WiFi 6 Access Point. If your installation only needs WiFi 5, the IP-COM iUAP-AC-LR Long Range Access Point provides a different balance of wireless features and cost.
For smaller ceiling-mounted spaces, the IP-COM iUAP-AC-LITE is another option. You can compare these models in the IP-COM Access Point Collection or browse the wider Access Point and Range Extender Category.
IP-COM Pro-6-LRV2.0 Price in Bangladesh
The current listed IP-COM Pro-6-LRV2.0 price in BD is ৳12,200 at Trende Bangladesh, compared with a regular price of ৳14,000.
If you are looking for an 802.11ax dual-band long range access point with AX3000 wireless performance, 160MHz support, PoE installation and business-oriented management, the IP-COM Pro-6-LRV2.0 offers a capable foundation for a professionally planned WiFi 6 network.
Check current stock, warranty details and installation compatibility before ordering from Trende Bangladesh.